| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours1 |
| Warranty: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical features and process parameters
.Technical features:
1.The racks and cylinder are both with internal water cooling, increasing the life of the blades and seals.
2.Four edges of the blade can be rotated , increase the usage rate of the blade (about 50 to 80 thousand times per blade)
3.Due to adopting PLC programmable controller control , the system works stably and reliably.
4.Adopt automatic sizing shearing device; Flat shear (diagonal shearing, tiny head, convenient for rolling mill), small size error.
1.The temperature of billet is controlled above 800 degrees,normal shear section: 80 x 80mm ~ 180 x 180mm
2. The shear cylinder diameter:560mm;Instantaneous shearing time:3s
4. The power of pump set:37KW(A dual-use equipment )
Costs comparison between traditional flame cutting (including manual cutting) and hydraulic shear :
|
NO. |
Expense |
Flame cutting (including manual cutting) |
Hydraulic shear |
Remarks |
|
1 |
Kerf |
4~6mm |
Nothing |
|
|
2 |
Fuel |
Oxygen and acetylene |
Hydraulic fluid |
Hydraulic fluid can be circularly used,ignorant to most of it |
|
3 |
Consumable Supplies
|
Cutting nozzle and flame cutting torch |
Blade |
50 to 80 thousand times per blade,ignorant to most of it |
|
4 |
Labour force |
Hand-cut and Slag removal |
||
|
5 |
CaloricExpenditure |
Cutting time:20S~25S |
Cutting time:3S~5S |
){kind=link}