Fujian, China
Business Type:
Manufacturer/Factory
Registered Capital:
6000000 RMB
Plant Area:
>2000 square meters
Management System Certification:
ISO 9001
Average Lead Time:
Peak season lead time: one month
Off season lead time: within 15 workdays
OEM/ODM Service

Continuous Casting and Rolling, Hydraulic Shear, Rolling Mill manufacturer / supplier in China, offering Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear, Emission Concentration Design Index ≤ Twenty Five Mg Induction Furnace Steelmaking Dedusting, Pouring Scrap Steel Into Medium Frequency Induction Furnace Charger Vehicle and so on.

Gold Member Since 2019
Audited Supplier
Supplier Homepage Products Steelmaking equipments 45deg Hydraulic Shear Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
  • Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear

Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear

Get Latest Price
Min. Order / Reference FOB Price
1 Piece US $23,000-28,000/ Piece
Port: Mawei Port, China
Production Capacity: 90 Pieces /Year
Payment Terms: T/T
Customized: Customized
Condition: New
Power Source: Gas
Automatic Grade: Automatic
Type: Steel-Making Equipment
Certification: ISO

You Might Also Like

Loading...

Basic Info

Model NO.
YCKJ_Shear
Nominal Pressure
4000kn
Shear Size
165×80×40
Railway Size
165×80×40
Energy Accumulator
100L
Trademark
Yachuang Technology
Transport Package
Box
Specification
alloy steel
Origin
Fuzhou Fujian
HS Code
8454309000

Technical features and process parameters

.Technical features:

1.The racks and cylinder are both with internal water cooling, increasing the life of the blades and seals.

2.Four edges of the blade can be rotated , increase the usage rate of the blade (about 50 to 80 thousand times per blade)

3.Due to adopting  PLC programmable controller control , the system works stably and reliably.

4.Adopt automatic sizing shearing device; Flat shear (diagonal shearing, tiny head, convenient for rolling mill), small size error.

1.The temperature of billet is controlled above 800 degrees,normal shear section: 80 x 80mm ~ 180 x 180mm

2. The shear cylinder diameter:560mm;Instantaneous shearing time:3s

3. Expansion stroke:310mm;Minimum strand distance of continuous casting machine:1200mm

4. The power of pump set:37KW(A dual-use equipment )

  Costs comparison between traditional flame cutting (including manual cutting) and hydraulic shear :

NO.

expense

flame cutting

(including manual

cutting)

hydraulic shear

remarks

1

kerf

4~6mm

Nothing

 

2

fuel

Oxygen and

acetylene

hydraulic fluid

hydraulic fluid can be circularly used,ignorant to most of it

3

Consumable

Supplies

 

 

cutting nozzle and flame cutting torch

Blade

50 to 80 thousand times per blade,ignorant to most of it

4

 labour force

 hand-cut and Slag removal

  

5

 CaloricExpenditure

Cutting time:20S~25S

Cutting time:3S~5S

 

 

 Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear
Continuous Casting and Rolling Cutting Billet 60-160mm Hydraulic Shear

 

1. According to the comparison between traditional flame cutting (including manual cutting) and hydraulic shear, in the case of heat consumption,theuse of hydraulic shear saves about ¥5-¥8 per ton.

2. Cost savings of using the hydraulic shears for each continuous casting machine per month:(25t/h*16h/d*28d/month*5yuan/t=56,000.00yuan)

3. The time to recover the cost of hydraulic shear:4 month

(56,000.00yuan/month*4month=224,000.00yuan)

4.Suggestion:If the factory have used continuous casting and rolling project,it had batter use hydraulic shear.Reason:(it will save 18s after usinghydraulic shear,the billet temperature is higher ,Increase the yield, reduce the loss of mill equipment, save power.   ) 

Send your message to this supplier

*From:
*To:
avatar Mr. James Leo
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now