Mould of Continuous Casting Machine CCM

• After-sales Service: 24 Hours
• Warranty: 1
• Customized: Non-Customized
• Condition: New
• Power Source: Electric
• Automatic Grade: Semi-Automatic
• Model NO.: YCKJ-furnace
• Type: Steel-Making Equipment
• Certification: ISO
• Transport Package: Packed in Container
• Trademark: Yanchuang Technology
• Origin: China
• HS Code: 8454902900
• Production Capacity: 200 Pieces /Year

Product Description

Product description
Crystallizer is a key component of continuous casting equipment. During the solidification process when molten steel is injected into the mold to gradually form the shell thickness, the mold is required to have good thermal conductivity, cooling capacity and wear resistance; Good rigidity.
In order to meet the above functions, the crystallizer adopts the structure of narrow water gap and high water speed cooling. This structure will effectively avoid the local boiling of cooling water, so that the slab passing through the crystallizer not only increases the shell thickness, but also reduces the corner cracks and off square. The crystallizer is mainly composed of copper tubes, inner and outer water jackets, 0-stage sprinkler, etc. The copper pipe is an arc-shaped pipe with parabolic taper, which is sealed with seals. The upper flange is clamped on the upper part of the outer water jacket, and the lower flange positions the copper pipe, which can make the copper pipe expand freely. The outer water jacket is a steel plate weldment, with cooling water inlet and outlet pipes of the crystallizer. The support plate for aligning and connecting the crystallizer and the vibrating device is used to fix the upper flange of the copper pipe and the lower flange and protective plate for positioning the copper pipe. The inner water jacket is made of stainless steel to ensure the high flow rate of cooling water in the water gap on the outer wall of the copper pipe and uniform cooling of the copper pipe. The water jacket crystallizer uses specially equipped circulating cooling water to enter the outer water jacket from the water inlet pipe of the crystallizer (the low-temperature water in the water gap around the copper pipe goes down and up along the outer surface of the copper pipe), and finally the high-temperature water leaves the crystallizer from the water outlet pipe on the upper part of the copper pipe.

Main technical parameters
Structure form: narrow slot water guide sleeve crystallizer
Copper tube type: arc tube type with taper
Material: phosphorus deoxidized copper
Length: 150x150 × 900mm, reserved 165x225 × 900mm, 165x280 × 900mm
Cooling water pressure: ≥ 1MPa


Crystallizer vibrating device
technical parameter:
Type      short arm four-bar type with spring plate guide
Vibration mode   Sine curve
amplitude  4mm
frequency  80~300 times/min
Reducer:  Speed ratio =1:6.67
Motor:     YTA160M-4 1440r/min 11Kw

Function and structure
The vibrating device is used to make the mold move up and down to prevent the mold from adhering to the slab and make the slab move down along the inner cavity of the mold. The vibration device is composed of a fixed frame, a vibration arm, a vibration frame, a spring steel plate guide device and a driving device. The vibration frame is controlled by the spring steel plate guide device and the vibration arm to form a four-bar mechanism to ensure that the mold produces arc-shaped vibration. The driving device includes variable frequency motor and reducer. The motor adopts AC variable frequency speed regulation. The driving device is placed on the second floor platform to facilitate maintenance. The driving device is placed on the second floor platform to facilitate maintenance.