1cbm Capacity of Induction Furnace Hydraulic Feeding Car

• After-sales Service: 24 Hours
• Warranty: 1
• Customized: Customized
• Condition: New
• Power Source: Electric
• Automatic Grade: Semi-Automatic
• Model NO.: YCKJ-furnace
• Type: Steel-Making Equipment
• Certification: ISO
• Load Capacity: 5t
• Transport Package: Wooden Case
• Specification: 6600× 2120× 1550mm
• Trademark: Yachuang Technology
• Origin: Fuzhou Fujian
• HS Code: 842790000
• Production Capacity: 100 Pieces /Year

Product Description

The charging car is used in refining furnace, intermediate frequency furnace and other steelmaking workshops in steel works. It is installed at the back end of the furnace shell. According to the site conditions, it is arranged horizontally or vertically. Each furnace is equipped with 1 to 3 charging car (depending on the size of the furnace).
Main technical parameters(Maybe changed after exactly design)

1)Loading of vehicle hopper:≤5Tons
2)Tilting Angle range:0°~35°
3)Tilting cylinder stroke:0~730mm
4)Size(L×W×H):
   6600×2120×1550mm
5)Tilting force:0~10Tons
6)System pressure:0~16MPa
7)Driving motor power:
   1.5KW×2 sets
8)Moving speed:20m/min
9)Space between tracks:1300mm


Main advantages:
1. The scrap steel is added to the furnace quickly and centrally, instead of manual or sucker operation, so as to reduce labor intensity (high temperature radiation at furnace mouth) and labor cost.
2. The centralized feeding mode is realized by the rear feeding truck, which reduces the frequency and time of feeding in the original process, greatly improves the charging efficiency and makes the IF work at full load, thus increasing the output.
3 The transportation and tilting of the charger vehicle eliminate the contradiction which the original hanging chuck impacts on the space 
of the dedusting system, thus contributing to the dust collection.
4. The remote control operation of the equipment is helpful to the simple and convenient operation on the spot.


 Main technological innovation points:
1)The vehicle hopper tilting is driven by double hydraulic cylinder, which has large driving force and stable operation
2)Hydraulic components are concentrated in the design of the rear part of the device,keep away from heat source,and increase the reliability of equipment operation.
3)Using remote electrical control which can achieve shut down and emergency power off freely.
4)Small equipment volume,save space,convenient operation,flexible application. 
5)The hopper is made of cambered pressed-steel plate wholly,increases the strength and reduces the resistance of scrap steel while tipping over (the traditional hopper is made of welded steel plate, but the disadvantage is that too much welding seam reduces the strength and the welding stress causes large deformation, and too much welding seam increases the resistance of scrap steel while tipping over).
6)The cable collecting device running simultaneously with vehicle(avoid damage cau